Ring size conversion

OPTION 1 - If you already know your ring size

It is very important to choose your correct ring size as most of our rings are made to order specially for you. We would normally recommend that you get your ring size measured at a local Jewellers, they will tell you your size in US or British. To double check your size enter the numeric size (starts from size 4 upwards in increments of 0.5) in the USA size field, press the CONVERT button and it will show you your corresponding British or European size. To try another size press CLEAR and enter another numeric. You can only enter into the USA field first.

OPTION 2 - If you do not know your ring size

1. Cut a strip of paper approximately 0.5cm wide. Wrap the paper around the widest part of your finger where you would like the ring to sit, mark it where the paper meets.
2. Tape the ring at the back so you have made a paper ring and make sure it fits onto the finger, if you have a large knuckle also take this into account and make sure it will fit over the knuckle.
3. Measure the length of paper where you have marked it in millimeters and put that figure into the circumference box, we only cater for sizes starting from 46.7mm upwards. Once you have worked out your circumference, put that figure it into the circumference box and press the CONVERT button and it will bring up your corresponding US size, use this size when ordering. If you want to re-enter press the CLEAR button and re-enter

We accept the following credit and debit cards: